The direction of the flooring is usually in line with the direction of the room, from left to right or from right to left, and the grooves to the wall, between the floor and the wall [url=http://pvcfencesale.com]PVC FENCE SALE[/url] , between the wooden wedge and the expansion joint.First take a floor, 30 ~ 45 degree Angle with the ground, the tenon mortise close to a piece on the floor, after floor against put down gently, with a claw hammer and small wood floor along the edges, and make the floor joining together tightly, if floor still appear after beating cock, can knock on the edge of the floor surface near the place.
Note: in dry area, the floor is wet, the expansion joints should be small, and the expansion joints in the wet areas should be kept large.The final row of floors is cut and assembled by measuring the width of the floor, which is tightly packed with hooks or spirals.Bridge installation: in the room, hall, and the interface between the interface, the floor must be isolated and treated, the seam should be done, and the connecting rod and metal bridge will be used.
install the skirting board: The wooden floor and the color furniture together the beautiful home. The thickness of the skirting board should be greater than 1.2 cm.When installation, floor expansion gap between 5-12mm, apply polyphenylene plate or elastomer to fill in air, in case the floor loosens.Install the skirting board and be sure to cover the stretch.
[url=http://pvcfencesale.com/wpc-floor/6202.html]wood plastic composite wall covering[/url]
[url=http://pvcfencesale.com/wall-panel/3354.html]marine plank teak pattern decks[/url]
[url=http://pvcfencesale.com/pvc-fence/5433.html]pool layout design with vinyl fence[/url]
[url=http://pvcfencesale.com/wall-panel/3909.html]making a flower box use wood composite[/url]